Видео

The depth of field on your overhead camera is very small or thin with the camera strugling to refucus with just a small movement up and down of your hands. My suggestion is to use more light and push your asa up while decreasing your exposure. This will help increase your depth of field. Thank you for all the great info. This might be a great extruder for a multi tool head printer.

FreeCAD is just AWFUL. Extrude face PYTHON ERROR CRASH. Open sved File PYTHON ERROR CRASH. Switch workbench PYTHON ERROR CRASH. STOP USING PYTHON!

Why not do a giveaway ? Once a month ?

has anybody told you that you look like Toby Maggiore

This did not age well considering that Prusa switched back to the 0.4 on the XL.

“In a pinch you could use pasta water”. Just have to go to the grocery store to buy some pasta ~30min, boil the pasta ~15 min, strain and collect the water, pour it over the bed and let it dry ~1 hr.

You don't even need to buy the concentrate, you can actually just make it yourself with some metals you want to use, salt and the power supply. Also leave the part soaking in water for a bit if it is likely to trap liquid so it gets all the solution out, not that it's a huge issue since this metal only method makes much more dilute solutions anyway.

2:21 I'm glad you don't do anything beyond printing like home improvement or automotive, 80% of the video would be telling people everything is toxic, use your sense and you will be just fine.

Thoroughly enjoyed the previous video & this one. awesome stuff!

I use the lockbuild beds, sticks like funk, Cleaned with ipa like normal but suddenly not sticking just realised my hands weren’t clean as working on cars dose that. I’ll do a full reset later.

To add to your point about VHB tape at 13:27, I've had VHB tape holding up a 3D printed phone mount on my car's dash for the past 3 years without any issues. The dash is close to vertical so the force acting on the tape is more of a sheer force than the ones in your test. I think that with the tape also sticking very well to the car means that VHB tape is a great option for this use and maybe better than glues. Plus VHB tape is removable-ish so for something in a car that you dont wanna use glue on its a great choice

seeing him struggling to talk and cough after taking the case off for 3 seconds was eough to convince me that I'm not transitioning to resin lol. I'll take sanding/priming over cancer/lunhg disease any day.

I'd worry about prong nuts loosing up and falling out the back, but I guess it depends on the application

Can anyone direct me to a normal speaking SLOW guide to setting up klipper on a Neptune 4 Pro. I thought I had it working then I tried to add some of the "addons that make your life easier" and as usual it broke everything and the helpful guy who made the first video won't respond to any questions about how even though I did everything the same mine broke and his works..... sigh 4 years of printing and I still feel like I need a PHD In engineering to do anything above taking it out the box and using it as the manufacture decided was good enough

Hey Thomas, don't know if you'll see a comment on a video this old, but, can you do a video on the new Sidewinders? They seem to be packed with much more modern tech while still being relatively competitively priced, and specifically, it'd be cool to directly compare the features of the old X1 with the features of the new X..4?(I think). Thanks

Because I often print practical stuff, I was always using 0.6 begrudgingly, because I didn't have a good high flow hotend for a consistent 0.8

3:15 ironic

But iam doing the inverse of this...trying to insert M2.5 3d designed one into a wood case ...for RaPi...because M 2.5 Wood screw inserts never i have seen... Or is it ok to insert M 2.5 Brass hex Spacer Standoffs into a wood with superglue??

Prints a perfect Benchy. Then. Rams the bed into the nozzle visibly bending the x-axis. Then. Prints out a box. Then. Criticises the box quality. Well.... duh...

How is octoprint communicating with the printer??

It's been a spell since you made this video, but do you know if it makes any difference if the copper plating is thicker or thinner for heavy use high temperature components?

1:19 "This one is a flat 3 thousand Euros." That's how a Brazilian feels when we buy a 200$ A1 mini for 3 thousand of our money, which is as hard to earn as if it was 3 thousand dollars.

This is the reason why I'm stuck with ender3. It's fun to play with, but I want coreXY ☹️

Interesting but very niche. The best results I get in terms of "special" effects is when I print in clear resin, and after curing, stain the print with alcohol inks. Add a gloss varnish to finish, and you get some pretty amazing magic looking effects. With the correct lighting, they seem to glow and/or look like magical spells.

what a cute little a1 mini wanabe!❤

Another material that you could try is cellulose. You can find bales that are used to make paper pulp and grind them to a powder.

make a video on desoldering irons.

20 ucks for 10 small plastic holed cylindrers with like 0 r&d?lol

14:22 WAIT A SECOND, THATS THE EXACT SAME PRINTER (not the 3d one, the paper printer you are using to scan the bottom) MY MOM HAS, WHAT IS THIS COINCIDENCE ????????????

What software is does he use , in the video for the easy 3D editing

I found nickle silver paint works best

A cheap entry to 3d printing

omg that blahaj tho

DangerKlipper actually has a branch in the works that seems to already support the Artery STM32 clone, you should try installing that!

Im Wondering how long till one of thes sub $120 machines comes with klipper stock.

Looks like a very sweet printer - it might be time for an upgrade in my workroom

Hehehehe, looks good to print big dongs 😂

What happens to the retired Prusas in the print farm?

I'm completely new to 3D printing and am trying to absorb information like a sponge. I would LOVE to see these tests redone, but with the filament being in a high moisture environment for a longer period of time. Maybe a month.

Damn, I’m excited for this project.

They OBSESSED with the orange color.

Can it print selfie action figure heads ?

Great video, nice useful comments too. For an IT novice, is there a simpler version of this please? I need one of these too.

Love this video, it's awesome and the work you have done is really cool to see! Personally, I would love to see a "Part 3" with an upgraded toolhead (at least some way of running a more conventional hot tend with better flow rate)

It's the tear strength of the material, PC has the highest of those three

I worked at an HP factory. this is generally accurate to what the line looked like, just with much less 3d printed parts.

Sad, that was a beautiful hair.

i know what you mean. i cant give away my ender 3 without telling someone they can just get an a1 mini and have no headache

me too and yeah giving away printers also creates headaches for me, like, i cant giev someone a machione i know has problems and theya ll have problems

my problem with freecad is the change on design and workflow in every version. if you search for a tutorial most you get is old stuff not working anylonger